DCL Home  All Content Seaward Fenders
|
Seaward Fenders |
|
Representatives of Seaward International, Inc.: Protecting Structures, Ships, Environments, Budgets
Seaward International, Inc. is a world leader in innovative uses of plastics and elastomer technology. Founded in 1973, the company provides a wide range of products and services to the marine industry, including marine fenders and buoys; elastomer coatings; plastic pilings and timber; and special anechoic coatings and installation equipment.
Seaward's Marine Products Division features buoys, fendering systems, and specialty products made primarily from polyethylene and polyurethane. Among these, the SEA CUSHION™ and SEA GUARD™ Fenders and SEAFLOAT™ Buoys are recognized standards in their field. A new product, SEALINK™ Elastomer Chain Link Energy Absorber, reduces peak loads on mooring and tow lines by 50% or more.
The Engineered Plastics Division manufactures structurally reinforced composites from recycled plastic, including SEAPILE™ Composite Marine Piling and SEATIMBER™ Composite Marine Timber. Made of 100% Duralin™ Plastic and strengthened with fiberglass reinforcing elements, the SEAPILE and SEATIMBER are impervious to deterioration caused by marine organisms. Primarily, the SEAPILE and SEATIMBER are used as fenders, fender piles, light structural applications, and bridge pier protection. Since both the SEAPILE and SEATIMBER are manufactured in continuous lengths, size and profile can be varied to fit specific customer and project requirements.
Foam-Filled Marine Fenders
|
Sea Cushion Marine Fenders
|
Dependable ship-to-ship lightering and dock fenders. Rugged, unsinkable design and superior energy absorbing characteristics make these fenders suitable where large vessel standoff or external chain and tire net type floating fenders are desired. |
Sea Guard Marine Fenders
|
High performance fenders for docks, piers, wharfs, some ship-to-barge and barge-to-barge fendering. Netless design, thick high performance outer skin, an integral galvanized steel end fitting with a heavy duty internal chain which provides pull-through strength.
|
|
Donut Monopile Fenders
Innovative dock fendering system based on the use of a floating ring-shaped fender which rides up and down on a central piling.
|
 |
Small Shipboard and Utility Fenders
Fenders for:
- Small boats
- Ferries
- Cruise ships
- Passenger transfer vessels
- Marinas
Foam-Filled Buoys
Seafloat Buoys & Floats
ABS type approved, heavy duty, foam filled buoys with thick nylon reinforced skin, for large or small vessels:
- Mooring Buoys
- Pendant Buoys
- Support Buoys
- Oil Boom Buoys
- Marker Buoys
- Chain Buoys
- Spar Buoys
Engineered Plastics
Seapile & Seatimber Composite Marine Products
 |
100% recycled plastic piling and timbers which provide an alternative to traditional chemically treated wooden piles. For use in marine dock fendering, wales, chocks, and as light structural elements. |
Coatings
Techthane Elastomer Coatings & Resins
Urethane elastomer coatings and resins for abrasion protection, corrosion protection and seamless lining service in the mining, power generation, transportation, marine and other industries.
- 100% solids high build spray coatings
- Bath-mix high build spray coatings
- Trowel coatings
- Room temperature casting kits
- Prepolymers
Specialty Applications
- Modified Draft Fenders
- Panel System Fenders Continuously Cast Urethanes
- Hydro-Pneumatic Fenders
- Large Standoff Fenders
- Anechoic Materials
- Elastomer Chain Link Energy Absorbers
SEALINK™ is a trademark of Seaward International, Inc. DURALIN®, SEAPILE®, SEATIMBER®, SEA CUSHION®, and SEAFLOAT® are registered trademarks of Seaward International, Inc. SEA GUARD® is a registered trademark of ChemRoy-Seaguard Corp., used under license by Seaward International, Inc.
|
Dreyfus-Cortney-Lowery Mooring and Rigging
(A Division of Dreyfus-Cortney, Inc.)
|
|
|
